Bormed LE6607-PH Borealis Polyethylene, Low Density

Product Description

Bormed LE6607-PH is a low density polyethylene produced in a high-pressure process. It is intended for blow moulding of soft and flexible packages for pharmaceutical products. The product can also be used for injection moulding and film blowing.

Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide, gamma radiation, electron beam radiation or steam. Sterilisation steam temperature maximum 110 °C.

Applications:

Packaging for pharmaceutical products
"blow-fill and seal"
Ampoules and Bottles

General

Material Status

Commercial: Active

Availability

North America

Features

E-beam Sterilizable

Good Flexibility

Low Density

Radiation Sterilizable

Recyclable Material

Soft

Steam Sterilizable

Uses

Bottles

Pharmaceutical Packaging

Agency Ratings

Processing Method

Blow Molding

Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Yield)		psi	ISO 527-2/50
Tensile Strain (Break)		%	ISO 527-2/50
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ LE6607-PH, Bormed LE6607PH, Bormed™ , Bormed, BormedLE6607PH, LE 6607, LE 6607 PH, LE6607-PH, LE6607PH, LE6607:PH, LE6607/PH, LE6607+PH, LE6607_PH, LE6607 PH, LE6607, 6607PH, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Borealis, PolyethyleneLowDensity, 6607LE
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Good Flexibility, Flexible, Steam Sterilization, Steam Sterilizable, e-beam Sterilization, E-beam Sterilizable, electron beam, electron-beam, electron beam radiation, e-beam radiation, Radiation Sterilizable, Radiation Sterilization, gamma sterilization, gamma sterilizable.
Uses
Uses may also be described by the following terms: Pharmaceutical Packaging.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): DMF (2), EP (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Bormed™ LE6607-PH

Low Density Polyethylene

Supplied by Borealis AG