IDES Prospector Already have an account? Login Here

IDES

Bormed™ RB845MO

Polypropylene Random Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Bormed™ RB845MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormed RB845MO is a random copolymer for blow moulding, with good transparency and contact clarity, very good gloss and surface finishBottles up to 2 litres can be steam sterilised due to heat distortion temperature (HDT) This grade also features high heat distortion temperature. Products from this grade can also be produced by IBM.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Contact Clarity
  • Good Surface Finish
  • High Clarity
  • High Heat Resistance
  • Medium Gloss
  • Random Copolymer
  • Recyclable Material
  • Steam Sterilizable
Uses 
  • Bottles
  • Containers
  • Packaging
  • Pharmaceutical Packaging
  
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ RB845MO, Bormed RB845MO, Bormed™ , Bormed, BormedRB845MO, RB 845 MO, RB845MO, RB845, 845MO, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Borealis, PolypropyleneRandomCopolymer, PPRandomCopolymer, 845RB
Features
Features may also be described by the following terms: Random Copolymer, Contact Clarity, Medium Gloss, Good Surface Finish, Steam Sterilization, Steam Sterilizable, High Clarity, High Heat Resistance.
Uses
Uses may also be described by the following terms: Pharmaceutical Packaging.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.