IDES Prospector Already have an account? Login Here

IDES

Bormed™ RG835MO

Polypropylene Random Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Bormed™ RG835MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormed RG835MO is a specially modified transparent polypropylene random copolymer with high meltflow. This polymer grade is intended for production of medical and medical-related articles. This grade is modified with internal lubricant for products requiring a low surface friction. and is characterized by easy processability, high transparency, high gloss, controlled low friction, and good stiffness-impact balance at ambient temperature. In addition it can be sterilized with ethylene oxide or steam and has an excellent chemical resistance.

In addition to its good physical properties and excellent transparency, this grade also yields products with good printability, which are easily demoulded.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Lubricant
Features 
  • Ethylene Oxide Sterilizable
  • Excellent Printability
  • Good Chemical Resistance
  • Good Impact Resistance
  • Good Mold Release
  • Good Processability
  • Good Stiffness
  • High Clarity
  • High Flow
  • High Gloss
  • Low Friction
  • Lubricated
  • Random Copolymer
  • Recyclable Material
  • Steam Sterilizable
Uses 
  • Caps
  • Closures
  • Hypodermic Syringe Parts
  • Medical/Healthcare Applications
  • Tubing
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormed™ RG835MO, Bormed RG835MO, Bormed™ , Bormed, BormedRG835MO, RG 835 MO, RG835MO, RG835, 835MO, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Borealis, PolypropyleneRandomCopolymer, PPRandomCopolymer, 835RG
Features
Features may also be described by the following terms: Random Copolymer, High Flow, High Melt, High MFI, Low Friction, Good Processability, Easy Processing, High Gloss, Good Stiffness, Good Impact Resistance, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Steam Sterilization, Steam Sterilizable, Good Chemical Resistance, Chemical Resistant, Excellent Printability, Printable, High Clarity, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Medical Applications, Tubing, Tube.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.