IDES Prospector Already have an account? Login Here

IDES

ACLAR® 33C (7.8 mil)

Polychlorotrifluoroethylene

Supplied by Honeywell

The technical datasheet with complete property values for ACLAR® 33C (7.8 mil) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Aclar 33C is a copolymer film consisting primarily of chlorotrifluoroethylene (CTFE). 33C 7.80 mil combines outstanding moisture barrier with excellent chemical resistance and mechanical strength. 33C is used for military and industrial packaging applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Barrier Resin
  • Copolymer
  • Good Chemical Resistance
Uses 
  • Industrial Applications
  • Military Applications
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
MD: 7.8 mil
psi
  
TD: 7.8 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 7.8 mil
psi
  
TD: Yield, 7.8 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Yield, 7.8 mil
%
  
TD: Yield, 7.8 mil
%
  
Water Vapor Transmission Rate (100°F, 7.8 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Thermal
Nominal Value
Unit
Test Method
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.00780 in)
%
 ASTM D2863
Optical
Nominal Value
Unit
Test Method
Haze (7.80 mil)
%
 ASTM D1003
Additional Information
Yield, No Standard: 2.38 m²/kg
Tear Strength, ASTM D1004, Graves MD: 425 to 525 g/mil
Tear Strength, ASTM D1004, Graves TD: 425 to 525 g/mil
Crystalline Melting Point, ASTM D4591: 206 °C
Dimensional Stability, ASTM D1204, 10 min, 300°F, MD: </= 2 %
Dimensional Stability, ASTM D1204, 10 min, 300°F, TD: </= 2 %
Tensile Strength @ Yld, ASTM D882, MD: 3000 to 4600 psi
Tensile Strength @ Yld, ASTM D882, TD: 3000 to 4000 psi
Elongation @ Yield, ASTM D882, MD: 50 to 125%
Elongation @ Yield, ASTM D882, TD: 50 to 125%
Secant Modulus, ASTM D882, MD: 185000 to 200000 psi
Secant Modulus, ASTM D882, TD: 185000 to 200000 psi
Flammability: Non flammable
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ACLAR® 33C, ACLAR 33C, ACLAR® 33C (7.8 mil), ACLAR 33C 78 mil, ACLAR® , ACLAR, ACLAR33C78mil, 33 C, 33C, 33 C 7 8 mil, 33C (7.8 mil), 33C 78 mil, C7, 78, 8mil, 33C78mil, Polychlorotrifluoroethylene, PCTFE, Fluoropolymer, Honeywell, C33
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.