IDES Prospector Already have an account? Login Here

IDES

ACLAR® 33C (2 mil)

Polychlorotrifluoroethylene

Supplied by Honeywell

The technical datasheet with complete property values for ACLAR® 33C (2 mil) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Aclar 33C is a copolymer film consisting primarily of chlorotrifluoroethylene (CTFE). It has excellent moisture barrier and chemical resistance. 33C is used for military and
industrial packaging applications as a monolayer film or as a barrier layer in laminate structures.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Barrier Resin
  • Copolymer
  
Uses 
  • Medical/Healthcare Applications
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
MD: 2.0 mil
psi
  
TD: 2.0 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 2.0 mil
psi
  
TD: Yield, 2.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Yield, 2.0 mil
%
  
TD: Yield, 2.0 mil
%
  
Water Vapor Transmission Rate (100°F, 2.0 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Thermal
Nominal Value
Unit
Test Method
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.00200 in)
%
 ASTM D2863
Optical
Nominal Value
Unit
Test Method
Haze (2.00 mil)
%
 ASTM D1003
Additional Information
Yield, No Standard: 9.3 m²/kg
Tear Strength, ASTM D1004, Graves MD: 400 to 500 g/mil
Tear Strength, ASTM D1004, Graves TD: 375 to 475 g/mil
Crystalline Melting Point, ASTM D4591: 206 °C
Dimensional Stability, ASTM D1204, MD: </= 2.5 %
Dimensional Stability, ASTM D1204, TD: </= 2.5 %
Tensile Strength @ Yld, ASTM D882, MD: 6900 to 9700 psi
Tensile Strength @ Yld, ASTM D882, TD: 3900 to 5700 psi
Elongation @ Yield, ASTM D882, MD: 125 to 200%
Elongation @ Yield, ASTM D882, TD: 100 to 200%
Secant Modulus, ASTM D882, MD: 200000 to 225000 psi
Secant Modulus, ASTM D882, TD: 190000 to 220000 psi
Flammability: Non flammable
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ACLAR® 33C, ACLAR 33C, ACLAR® 33C (2 mil), ACLAR 33C 2 mil, ACLAR® , ACLAR, ACLAR33C2mil, 33 C, 33C, 33 C 2 mil, 33C (2 mil), 33C 2 mil, C2, 2mil, 33C2mil, Polychlorotrifluoroethylene, PCTFE, Fluoropolymer, Honeywell, C33
Uses
Uses may also be described by the following terms: Medical Applications.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.