IDES Prospector Already have an account? Login Here

IDES

ACLAR® 33C (0.75 mil)

Polychlorotrifluoroethylene

Supplied by Honeywell

The technical datasheet with complete property values for ACLAR® 33C (0.75 mil) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Aclar 33C (0.75 mil) is a copolymer film consisting primarily of chlorotrifluoroethylene (CTFE). It is thermoformable on both pressure and vacuum forming machines.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Copolymer
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Thermoforming
  • Vacuum Forming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
MD: 0.75 mil
psi
  
TD: 0.75 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 0.75 mil
psi
  
TD: Yield, 0.75 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Yield, 0.75 mil
%
  
TD: Yield, 0.75 mil
%
  
Water Vapor Transmission Rate (100°F, 0.75 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Thermal
Nominal Value
Unit
Test Method
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Optical
Nominal Value
Unit
Test Method
Haze (0.750 mil)
%
 ASTM D1003
Additional Information
Yield, No Standard: 24.8 m²/kg
Tear Strength, ASTM D1004, Graves MD: 400 to 450 g/mil
Tear Strength, ASTM D1004, Graves TD: 350 to 400 g/mil
Crystalline Melting Point, ASTM D4591: 206 °C
Dimensional Stability, ASTM D1204, MD: </= 2.5 %
Dimensional Stability, ASTM D1204, TD: </= 2.5 %
Tensile Strength @ yld, ASTM D882, MD: 11000 to 13000 psi
Tensile Strength @ yld, ASTM D882, TD: 3000 to 5000 psi
Elongation @ Yield, ASTM D882, MD: 50 to 100%
Elongation @ Yield, ASTM D882, TD: 50 to 100%
Secant Modulus, ASTM D882, MD: 220000 to 260000 psi
Secant Modulus, ASTM D882, TD: 190000 to 230000 psi
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ACLAR® 33C, ACLAR 33C, ACLAR® 33C (0.75 mil), ACLAR 33C 075 mil, ACLAR® , ACLAR, ACLAR33C075mil, 33 C, 33C, 33 C 0 75 mil, 33C (0.75 mil), 33C 075 mil, C0, 075, 75mil, 33C075mil, Polychlorotrifluoroethylene, PCTFE, Fluoropolymer, Honeywell, C33
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.