ACLAR 22C (2 mil) Honeywell Polychlorotrifluoroethylene

General

Material Status

Availability

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Films	Nominal Value	Unit	Test Method
Secant Modulus			ASTM D882
MD: 2.0 mil		psi
TD: 2.0 mil		psi
Tensile Strength			ASTM D882
MD: Yield, 2.0 mil		psi
TD: Yield, 2.0 mil		psi
Tensile Elongation			ASTM D882
MD: Yield, 2.0 mil		%
TD: Yield, 2.0 mil		%
Water Vapor Transmission		g/100 in²/24 hr	ASTM E96
Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity		Btu·in/hr/ft²/°F	ASTM C177
Flammability	Nominal Value	Unit	Test Method
Oxygen Index (0.00200 in)		%	ASTM D2863
Optical	Nominal Value	Unit	Test Method
Haze (2.00 mil)		%	ASTM D1003
Additional Information
Yield, No Standard: 9.45 m²/kg Tear Strength, ASTM D1004, Graves MD: 325 to 350 g/mil Tear Strength, ASTM D1004, Graves TD: 250 to 325 g/mil Crystalline Melting Point, ASTM D4591: 190 °C Dimensional Stability, ASTM D1204, MD: 5 to 10 % Dimensional Stability, ASTM D1204, TD: -5 to -10 % All film properties were tested as an average value.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ACLAR® 22C, ACLAR 22C, ACLAR® 22C (2 mil), ACLAR 22C 2 mil, ACLAR® , ACLAR, ACLAR22C2mil, 22 C, 22C, 22 C 2 mil, 22C (2 mil), 22C 2 mil, C2, 2mil, 22C2mil, Polychlorotrifluoroethylene, PCTFE, Fluoropolymer, Honeywell, C22

Notes

¹Typical properties: these are not to be construed as specifications.

ACLAR® 22C (2 mil)