IDES Prospector Already have an account? Login Here

IDES

ACLAR® 22A (1.5 mil)

Polychlorotrifluoroethylene

Supplied by Honeywell

The technical datasheet with complete property values for ACLAR® 22A (1.5 mil) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Aclar 22A is a copolymer film consisting primarily of chlorotrifluoroethylene (CTFE). It is a flexible transparent film used to package moisture sensitive products.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Copolymer
  • Good Flexibility
  
Uses 
  • Packaging
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
MD: 1.5 mil
psi
  
TD: 1.5 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 1.5 mil
psi
  
TD: Yield, 1.5 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Yield, 1.5 mil
%
  
TD: Yield, 1.5 mil
%
  
Water Vapor Transmission Rate (100°F, 1.5 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Thermal
Nominal Value
Unit
Test Method
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.00150 in)
%
 ASTM D2863
Optical
Nominal Value
Unit
Test Method
Haze (1.50 mil)
%
 ASTM D1003
Additional Information
Yield, No Standard: 12.64 m²/kg
Tear Strength, ASTM D1004, Graves MD: 325 to 350 g/mil
Tear Strength, ASTM D1004, Graves TD: 250 to 325 g/mil
Crystalline Melting Point, ASTM D4591: 190 °C
Dimensional Stability, ASTM D1204, MD: +12 to +15 %
Dimensional Stability, ASTM D1204, TD: -12 to -15 %
Tensile Strength @ yld, ASTM D882, MD: 7500 to 11000 psi
Tensile Strength @ yld, ASTM D882, TD: 5000 to 8000 psi
Elongation @ Yield, ASTM D882, MD: 115 to 225%
Elongation @ Yield, ASTM D882, TD: 200 to 300%
Secant Modulus, ASTM D882, MD: 140000 to 160000 psi
Secant Modulus, ASTM D882, TD: 150000 to 160000 psi
Flammability: non-flammable
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ACLAR® 22A, ACLAR 22A, ACLAR® 22A (1.5 mil), ACLAR 22A 15 mil, ACLAR® , ACLAR, ACLAR22A15mil, 22 A, 22A, 22 A 1 5 mil, 22A (1.5 mil), 22A 15 mil, A1, 15, 5mil, 22A15mil, Polychlorotrifluoroethylene, PCTFE, Fluoropolymer, Honeywell, A22
Features
Features may also be described by the following terms: Good Flexibility, Flexible.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.