PRE-ELEC ESD 7100 Premix OY Acrylonitrile Butadiene Styrene

Product Description

PRE-ELEC ESD 7100 is a static dissipative thermoplastic compound based on ABS. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 7100 has been developed for injection moulding and for the extrusion of thermoformable mono- or multi-layer sheet. The products made out of PRE-ELEC ESD 7100 are washable, reusable and recyclable. Surface resistance values of 1e8 ohms (EOS/ESD S11.11-1993, IEC 61340-5-1) can be achieved with optimum processing parameters.

Typical applications include trays, tote bins, crates and technical parts which give permanent ESD protection for the electronics, medical, pharmaceutical and paper handling industries. PRE-ELEC ESD 7100 can be coloured into various bright colours.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

South America

Features

ESD Protection

Recyclable Material

Uses

Electrical/Electronic Applications

Engineering Parts

Medical/Healthcare Applications

Pharmaceuticals

Sheet

Appearance

White

Forms

Granules

Processing Method

Extrusion

Injection Molding

Sheet Extrusion

Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
200°C/21.6 kg		g/10 min
200°C/5.0 kg		g/10 min
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength
Yield		psi	ASTM D638
Yield		psi	ISO 527-2
Break		psi	ISO 527-2
--		psi	ASTM D638
Tensile Elongation			ASTM D638, ISO 527-2
Yield		%
Break		%
Flexural Modulus
--		psi	ASTM D790
--		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.157 in)		ft·lb/in	ASTM D256
Unnotched Izod Impact (73°F, 0.157 in)			ASTM D256
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240, ISO 868
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (66 psi, Unannealed)		°F	ASTM D648, ISO 75-2/Bf
Vicat Softening Temperature		°F	ISO 306/A50, ASTM D1525²
Additional Information
Surface Resistivity, IEC 61340-5-1: <1e10 ohms Static Decay Rate, IEC 61340-5-1: <2 sec Surface Resistivity, EOS/ESD S11.11-1993: <1e10 ohms Static Decay Rate, EOS/ESD S11.11-1993: <2 sec
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PRE-ELEC ESD 7100, PREELEC ESD 7100, PRE-ELEC , PREELEC, PRE:ELEC, PRE/ELEC, PRE+ELEC, PRE_ELEC, PRE ELEC, PREELECESD7100, ESD 7100, ESD7100, Acrylonitrile Butadiene Styrene, ABS, Premix OY, AcrylonitrileButadieneStyrene, 7100ESD
Features
Features may also be described by the following terms: Electrostatic Discharge Protection, ESD Protection.
Uses
Uses may also be described by the following terms: Medical Applications, Engineering Parts, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Holding Pressure		psi
Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Die Temperature		°F
Extrusion Notes
Zone 6 Temperature: 200°C Roll 1 Temperature: 60°C Roll 2 Temperature: 60°C Roll 3 Temperature: 50°C

Notes

¹Typical properties: these are not to be construed as specifications.

²Rate A (50°C/h), Loading 1 (10 N)

PRE-ELEC ESD 7100

Acrylonitrile Butadiene Styrene

Supplied by PREMIX OY