IDES Prospector Already have an account? Login Here

IDES

PRE-ELEC CP 1315

Polyolefin

Supplied by PREMIX OY

The technical datasheet with complete property values for PRE-ELEC CP 1315 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PRE-ELEC CP 1315 is a conductive thermoplastic compound based on a polyolefin copolymer. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC CP 1315 has excellent mechanical properties and is easy to extrude or injection mould.

Typical applications include flexible extruded profiles and tubes and flexible injection moulded parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Copolymer
  • Electrically Conductive
  • Good Moldability
Uses 
  • Profiles
  • Tubing
  
Appearance 
  • Black
Forms 
  • Granules
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Molding Shrinkage
      
Flow
in/in
 ASTM D955
--
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
      
Break
psi
 ISO 527-2
--
psi
 ASTM D638
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.157 in)
 
 ASTM D256
Unnotched Izod Impact (73°F, 0.157 in)
 
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/Bf
Vicat Softening Temperature
°F
 ISO 306/A50, ASTM D1525 2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D4496
Volume Resistivity
ohm·cm
 ASTM D257
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PRE-ELEC CP 1315, PREELEC CP 1315, PRE-ELEC , PREELEC, PRE:ELEC, PRE/ELEC, PRE+ELEC, PRE_ELEC, PRE ELEC, PREELECCP1315, CP 1315, CP1315, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Premix OY, PolyolefinUnspecified, 1315CP
Features
Features may also be described by the following terms: Good Moldability, Electrically Conductive, Conducts Electricity, Conductive.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Zone 6 Temperature: 200°C
Roll 1 Temperature: 70°C
Roll 2 Temperature: 60°C
Roll 3 Temperature: 50°C
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.