PRE-ELEC ABS 1410 Premix OY Acrylonitrile Butadiene Styrene

Product Description

PRE-ELEC ABS 1410 is a conductive thermoplastic compound based on ABS. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC ABS 1410 has excellent mechanical properties and is easy to extrude or injection mould.

Typical applications include extrusion of multi-layer sheet for carrier tape production and the injection moulding of technical pieces.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

South America

Features

Electrically Conductive

Good Moldability

Uses

Engineering Parts

Sheet

Tape

Appearance

Black

Forms

Granules

Processing Method

Extrusion

Injection Molding

Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ISO 1133
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus		psi	ISO 178
Films	Nominal Value	Unit	Test Method
Tensile Strength
MD: Yield, 16 mil		psi	ASTM D882
MD: Yield, 16 mil		psi	ISO 527-3
MD: Break, 16 mil		psi	ASTM D882
TD: Break, 16 mil		psi	ASTM D882
MD: 16 mil		psi	ISO 527-3
TD: 16 mil		psi	ISO 527-3
Tensile Elongation			ISO 527-3
MD: Break, 16 mil		%
TD: Break, 16 mil		%
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.157 in)		ft·lb/in	ASTM D256
Unnotched Izod Impact (73°F, 0.157 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		°F	ASTM D648, ISO 75-2/Bf
264 psi, Unannealed		°F	ASTM D648, ISO 75-2/Af
Vicat Softening Temperature
--		°F	ASTM D1525², ISO 306/A50²
--		°F	ASTM D1525³, ISO 306/B50³
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	ASTM D4496
Volume Resistivity		ohm·cm	ASTM D257
Additional Information
Elongation at Yield, ISO 527, 400µm, MD: 4%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PRE-ELEC ABS 1410, PREELEC ABS 1410, PRE-ELEC , PREELEC, PRE:ELEC, PRE/ELEC, PRE+ELEC, PRE_ELEC, PRE ELEC, PREELECABS1410, ABS 1410, ABS1410, Acrylonitrile Butadiene Styrene, ABS, Premix OY, AcrylonitrileButadieneStyrene, 1410ABS
Features
Features may also be described by the following terms: Good Moldability, Electrically Conductive, Conducts Electricity, Conductive.
Uses
Uses may also be described by the following terms: Engineering Parts.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Die Temperature		°F
Extrusion Notes
Zone 6 Temperature: 240°C Roll 1 Temperature: 90°C Roll 2 Temperature: 80°C Roll 3 Temperature: 60°C

Notes

¹Typical properties: these are not to be construed as specifications.

²Rate A (50°C/h), Loading 1 (10 N)

³Rate A (50°C/h), Loading 2 (50 N)

PRE-ELEC ABS 1410

Acrylonitrile Butadiene Styrene

Supplied by PREMIX OY