IDES Prospector Already have an account? Login Here

IDES

Flexathene® PD907

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Flexathene® PD907 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FLEXATHENE PD 907 is a thermoplastic olefin (TPO) formulated for extrusion and thermoforming applications. PD 907 has an excellent balance of cold temperature impact resistance and stiffness. PD 907 is specially formulated for high melt strength, excellent dimensional stability and for use with paint film lamination. This product is readily reprocessed with minimal changes to processing characteristics or physical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Dimensional Stability
  • Good Melt Strength
  • High Stiffness
  • Low Temperature Impact Resistance
  
Uses 
  • Film
  • Laminates
  
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Density
      
--
g/cm³
 ISO 1183/A
--
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
      
230°C/2.16 kg
g/10 min
 ASTM D1238
230°C/2.16 kg 2
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Secant
psi
 ISO 527-2
Tensile Strength
      
Yield
psi
 ASTM D638
Yield
psi
 ISO 527-2
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
      
Tangent  3
psi
 ASTM D790B
Secant
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
0°F
 
  
Unnotched Izod Impact (-22°F)
 
 ASTM D4812
Instrumented Dart Impact 4
     ASTM D3763
-22°F, Energy to Peak Load, Ductile Failure
in·lb
  
73°F, Energy to Peak Load, Ductile Failure
in·lb
  
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow
in/in/°F
 ASTM E831
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Flexathene® PD907, Flexathene PD907, Flexathene® , Flexathene, FlexathenePD907, PD 907, PD907, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 907PD
Features
Features may also be described by the following terms: High Stiffness, Good Melt Strength, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Dimensional Stability, Dimensionally Stable.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
30.050 in/min
47.22 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.