IDES Prospector Already have an account? Login Here

IDES

Flexathene® TP4311HC

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Flexathene® TP4311HC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FLEXATHENE TP 4311-HC is a Thermoplastic Polyolefin (TPO) formulated for extrusion and blow molding applications that require medium stiffness and excellent impact strength . TP 4311-HC is produced in a proprietary gas-phase process that yields a product with greater resistance to mechanical and thermal degradation and more uniform dispersion than melt-blended rubber compounds. This product is readily reprocessible with minimal changes to processing characteristics.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Good Stiffness
  • High Impact Resistance
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
0°F
 
  
73°F
 
  
Unnotched Izod Impact (0°F)
 
 ASTM D256
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Flexathene® TP4311HC, Flexathene TP4311HC, Flexathene® , Flexathene, FlexatheneTP4311HC, TP 4311 HC, TP4311HC, TP4311, 4311HC, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 4311TP
Features
Features may also be described by the following terms: Good Stiffness, High Impact Resistance.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.