IDES Prospector Already have an account? Login Here

IDES

AD majoris DG 300

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DG 300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DG 300 is a 30% chemically coupled glass fibre reinforced polypropylene compound (with Yellow card) intended for injection moulding.

The product is available in natural, but other colours can be provided on request.

DG 300 has been developed especially for demanding applications in various engineering sectors.

DG 300 has high rigidity and impact strength, good dimensional stability and good creep resistancy also at high temperatures.

APPLICATIONS
Product requiring very high overall mechanical performance such as:
  • Sockets and junction boxes for electrical industry
  • Electrical tool and appliance components
  • Lamp housing
  • Miscellaneous technically items
Can suitably be made from DG 300.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Chemically Coupled
  • Good Creep Resistance
  • Good Dimensional Stability
  • High Impact Resistance
  • High Rigidity
Uses 
  • Electrical/Electronic Applications
  • Engineered Applications
  • Housings
  • Power/Other Tools
  
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (0.0787 in)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F, Injection Molded)
%
 ISO 527-2/50
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DG 300, AD majoris , ADmajorisDG300, ADmajoris, majorisDG 300, majoris, majorisDG300, DG 300, DG300, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 300DG, 300majorisDG
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Rigidity, High Impact Resistance, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Power Tools, Tools, Housings, Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 to 70% of the injection pressure.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.