IDES Prospector Already have an account? Login Here

IDES

AD majoris BT 400

Polypropylene

Mineral Filler, 40%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris BT 400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BT 400 is a 40% mineral filled polypropylene compound intended for injection moulding.
The light natural colour of BT 400 makes it easy to reach any colour tone. The compound is also supplied ready coloured according to the customer' requirements.

BT 400 is intended for components which require good long-term heat resistance, very high heat distortion temperature, excellent rigidity, low shrinkage and high dimensional stability.

APPLICATIONS
  • Technical items
  • Automotive parts
  • Miscellaneous electrical components
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 40% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Dimensional Stability
  • Heat Stabilized
  • High Rigidity
  • Low Shrinkage
  • Medium Heat Resistance
Uses 
  • Automotive Exterior Parts
  • Automotive Interior Parts
  • Electrical/Electronic Applications
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/5
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
Long Term Heat Stability, Injection Molded, 150°C: >700 hr
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris BT 400, AD majoris , ADmajorisBT400, ADmajoris, majorisBT 400, majoris, majorisBT400, BT 400, BT400, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 400BT, 400majorisBT
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Medium Heat Resistance, High Rigidity, Good Dimensional Stability, Dimensionally Stable, Low Shrinkage.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 to 70% of the injection pressure.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.