IDES Prospector Already have an account? Login Here

IDES

AD majoris DW 254

Polypropylene

Glass\Mineral, 25%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DW 254 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DW 254 is a 25% glass/mineral reinforced polypropylene compound intended for injection moulding.

The product is available in natural (DW 254), but other colours can be provided on request.

The good flow ability of DW 254 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW 254 is formulated to give an good surface finish and UV resistance is contains antistatic.

APPLICATIONS
  • Appliance moulding
  • Sport/leisure
  • Technical parts

Products requiring good rigidity, low shrinkage and high dimensional stability can suitably be made from DW 254
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass\Mineral, 25% Filler by Weight
Additive 
  • Antistatic
  • UV Stabilizer
  
Features 
  • Antistatic
  • Fast Molding Cycle
  • Good Dimensional Stability
  • Good Flow
  • Good Processability
  • Good Surface Finish
  • Good UV Resistance
  • High Rigidity
  • Low Shrinkage
Uses 
  • Furniture
  • Sporting Goods
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DW 254, AD majoris , ADmajorisDW254, ADmajoris, majorisDW 254, majoris, majorisDW254, DW 254, DW254, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 254DW, 254majorisDW
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Flow, Good Processability, Easy Processing, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Surface Finish, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Rigidity, Low Shrinkage, Good Dimensional Stability, Dimensionally Stable.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 to 70% of the injection pressure.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.