AQUAMID 66G20V0AH Aquafil Polyamide 66 (Glass Fiber Reinforcement, 20%)

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage (73°F)		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0315 in)			UL 94
Additional Information
Mold Shrinkage, ISO 2577, 23°C: 0.3 to 0.6 % Density, ISO 1183: 1.48 to 1.52 g/cm³ Melting Point, DSC: 260 ± 2 °C Glow Wire Test, IEC 60695, 1 to 3 mm: 960 °C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AQUAMID 66G20V0AH, AQUAMID , AQUAMID66G20V0AH, 66 G 20 V 0 AH, 66G20V0AH, 66G, G20, 20V, V0, 0AH, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Aquafil, Polyamide66, Nylon66, G66
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Self Extinguishing, Self-Extinguishing.

Notes

¹Typical properties: these are not to be construed as specifications.

AQUAMID 66G20V0AH