IDES Prospector Already have an account? Login Here

IDES

ECONYL 6G30D1

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by Aquafil Engineering Plastics Spa

The technical datasheet with complete property values for ECONYL 6G30D1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Uses 
  • Industrial Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/5
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Additional Information
Density, ISO 1183: 1.32 to 1.38 g/cm³
Melting Point, DSC: 220 ± 2 °C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ECONYL 6G30D1, ECONYL , ECONYL6G30D1, 6 G 30 D 1, 6G30D1, 6G, G30, 30D, D1, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Aquafil, Polyamide6, Nylon6, G6
Generic Name
Generic Name may also be described by the following terms: PA6.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.