IDES Prospector Already have an account? Login Here

IDES

Jamplast JPAH

Acetal (POM) Homopolymer

Supplied by Jamplast, Inc.

The technical datasheet with complete property values for Jamplast JPAH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • PTFE Lubricant (200000 ppm)
Features 
  • Good Wear Resistance
  • High Viscosity
  • Low Friction
  • Lubricated
  
Uses 
  • Bushings
  • Cast Film
  • Engineering Parts
  • Sheet
  • Tubing
  • Wire & Cable Applications
Appearance 
  • Brown
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Extrusion
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption
     ASTM D570
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (73°F)
psi
 ASTM D638
Tensile Strength 2 (73°F)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
°F
 DSC
CLTE
     ASTM E831
Flow: 73 to 130°F
in/in/°F
  
Transverse: 73 to 130°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.118 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPAH, Jamplast , JamplastJPAH, JPAH, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, AcetalPOMHomopolymer
Features
Features may also be described by the following terms: Low Friction, High Viscosity, Good Wear Resistance, Wear Resistant.
Uses
Uses may also be described by the following terms: Cast Film, Engineering Parts, Tubing, Tube, Wire and Cable Applications, Wire & Cable Applications.
Injection
Nominal Value
Unit
 
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.