Jamplast JPEVA10 Jamplast Ethylene Vinyl Acetate Copolymer

Product Description

JPEVA10 is an EVA copolymer with good toughness, flexibility and clarity. Applications include laminating and heavy duty films as well as injection and blow molding. JPEVA10 contains no additives.

General

Material Status

Commercial: Active

Availability

North America

Features

Food Contact Acceptable

Good Flexibility

Good Toughness

High Clarity

Uses

Film

Laminates

Forms

Pellets

Processing Method

Blow Molding

Film Extrusion

Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Vinyl Acetate Content		wt%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Films	Nominal Value	Unit	Test Method
Secant Modulus			ASTM D882
1% Secant, MD		psi
1% Secant, TD		psi
Tensile Strength			ASTM D882
MD: Yield		psi
TD: Yield		psi
MD: Break		psi
TD: Break		psi
Tensile Elongation			ASTM D882
MD: Break		%
TD: Break		%
Dart Drop Impact (2.0 mil)		g	ASTM D1709
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A
Shore D
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPEVA10, Jamplast , JamplastJPEVA10, JPEVA 10, JPEVA10, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, EthyleneVinylAcetateCopolymer, 10JPEVA
Features
Features may also be described by the following terms: High Clarity, Good Flexibility, Flexible, Good Toughness, Tough.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Type IV, 20 in/min

Jamplast JPEVA10

Ethylene Vinyl Acetate Copolymer

Supplied by Jamplast, Inc.