IDES Prospector Already have an account? Login Here

IDES

Jamplast JPHDPEHMW

High Density (HMW) Polyethylene

Supplied by Jamplast, Inc.

The technical datasheet with complete property values for Jamplast JPHDPEHMW is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
JPHDPEHMW is a high molecular weight, high density polyethylene copolymer. This resin has superior stress crack resistance, high impact strength and good rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • High Molecular Weight
  • Medium Rigidity
Uses 
  • Automotive Applications
  • Blow Molding Applications
  • Fuel Tanks
  • Sheet
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F, Compression Molded)
psi
 ASTM D638
Tensile Elongation (Break, 73°F, Compression Molded)
%
 ASTM D638
Flexural Modulus - Tangent 2 (73°F, 0.125 in, Compression Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength
     ASTM D1822
-40°F, Compression Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPHDPEHMW, Jamplast , JamplastJPHDPEHMW, JPHDPEHMW, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, PolyethyleneHighDensityHMW, HDPEHMW
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Impact Resistance, High Molecular Weight, High MW, Medium Rigidity, Good Rigidity.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Fuel Tanks.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.