IDES Prospector Already have an account? Login Here

IDES

Jamplast JPHGABS

Acrylonitrile Butadiene Styrene

Supplied by Jamplast, Inc.

The technical datasheet with complete property values for Jamplast JPHGABS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Jamplast high gloss resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. Jamplast ABS resins are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming processes.

Jamplast ABS resins are designed to offer a wide range of impact strengths and melt flow rates to meet the needs of the durables injection molding markets. This product offers typical Izod impact strength values from 4 to 7.5 ft-lb/in and melt flow rates ranging from 2.5 to 7.0 g/10 min. The gloss values are typically greater than 95% on the 60° Gardner scale for the highest gloss resins and greater than 90% for those products having a broader range of gloss.

Jamplast ABS resin offers a broader range of gloss while maintaining medium impact strength with a medium melt flow rate.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 4
     ASTM D256
0°F, 0.125 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
Instrumented Dart Impact 5
     ASTM D3763
0°F, 0.125 in, Peak Energy
in·lb
  
0°F, 0.125 in, Total Energy
in·lb
  
73°F, 0.125 in, Peak Energy
in·lb
  
73°F, 0.125 in, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0580 in)
 
 UL 94
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°)
 
 ASTM D523
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPHGABS, Jamplast , JamplastJPHGABS, JPHGABS, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyrene
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Clamp Tonnage
tons/in²
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
3Type I, 0.050 in/min
410 mil Notch Depth
511.1 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.