IDES Prospector Already have an account? Login Here

IDES

Jamplast JPPCABS10

Acrylonitrile Butadiene Styrene + PC

Glass Fiber Reinforcement, 10%

Supplied by Jamplast, Inc.

The technical datasheet with complete property values for Jamplast JPPCABS10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
JPPCABS10 engineering resin is a 10% glass reinforced resin designed to provide excellent processability, high heat resistance, and practical toughness. JPPCABS10 engineering resin has been used in automotive interior trim applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption
     ASTM D570
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 3
     ASTM D256
-20°F, 0.125 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
Instrumented Dart Impact 4
     ASTM D3763
-20°F, 0.125 in, Total Energy
in·lb
  
73°F, 0.125 in, Peak Energy
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed, 0.125 in
°F
  
264 psi, Annealed, 0.125 in
°F
  
CLTE - Flow (-40 to 180°F)
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPPCABS10, Jamplast , JamplastJPPCABS10, JPPCABS 10, JPPCABS10, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 10JPPCABS
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
310 mil Notch Depth
411.1 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.