IDES Prospector Already have an account? Login Here

IDES

Jamplast JPSANGI

Styrene Acrylonitrile

Supplied by Jamplast, Inc.

The technical datasheet with complete property values for Jamplast JPSANGI is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Jamplast SAN resin is a general purpose SAN copolymer that offers an excellent balance of chemical resistance, physical properties, practical toughness, and processability for injection molded or extruded applications. This resin has undergone biocompatibility testing in accordance with USP XXIII Class VI guidelines. Applications include houseware, appliance, water filter housing and medical.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Appearance 
  • Light Blue
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.125 in)
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield, 0.125 in
psi
  
Break, 0.125 in
psi
  
Tensile Elongation (Break, 0.125 in)
%
 ASTM D638
Flexural Modulus (0.125 in)
psi
 ASTM D790
Flexural Strength (Yield, 0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
66 psi, Annealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
264 psi, Annealed, 0.125 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Oxygen Index
%
 ASTM D2863
Optical
Nominal Value
Unit
Test Method
Transmittance
%
 ASTM D1003
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPSANGI, Jamplast , JamplastJPSANGI, JPSANGI, Styrene Acrylonitrile, SAN, StyreneAcrylonitrile
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Clamp Tonnage
tons/in²
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.