IDES Prospector Already have an account? Login Here

IDES

Jamplast JPTPUET

Thermoplastic Polyurethane Elastomer (Polyether)

Supplied by Jamplast, Inc.

The technical datasheet with complete property values for Jamplast JPTPUET is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
JPTPUET thermoplastic polyurethane elastomer is a polyester polycaprolactone based polyurethane elastomer which contains UV stabilizers and combines excellent resistance to fuels and oils with good hydrolytic stability compared to other polyester based TPUs. Its typical applications include seals, gaskets, belting, animal ID tags and other fabricated products.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • UV Stabilizer
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (224°C/1.2 kg)
g/10 min
ASTM D1238
Molding Shrinkage
    ASTM D955
Flow: 0.0630 in
in/in
 
Across Flow: 0.0630 in
in/in
 
Mechanical
Nominal Value
Unit
Test Method
Taber Abrasion Resistance (1000 Cycles, 1000 g, H-22 Wheel)
mg
ASTM D1044
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
    ASTM D412
50% Strain
psi
 
100% Strain
psi
 
300% Strain
psi
 
Tensile Strength (Break)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength 2
lbf/in
ASTM D624
Compression Set (77°F, 22.0 hr)
%
ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
DSC
Vicat Softening Temperature
°F
ASTM D1525
CLTE - Flow
in/in/°F
ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Jamplast JPTPUET, Jamplast , JamplastJPTPUET, JPTPUET, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Back Pressure
psi
 
Screw Speed
rpm
 
Clamp Tonnage
tons/in²
 
Screw L/D Ratio
 
 
Screw Compression Ratio
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.