IDES Prospector Already have an account? Login Here

IDES

Elastron® D 176.001 NATUREL 58 SHORE A

Styrene Butadiene Styrene Block Copolymer

Supplied by Elastron Kimya A.S.

The technical datasheet with complete property values for Elastron® D 176.001 NATUREL 58 SHORE A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  
Recycled Content 
  • Yes, 100%
Features 
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Colorability
  • Good Tear Strength
  • Low Temperature Flexibility
  • Recyclable Material
Uses 
  • Footwear
  • Gaskets
  • Medical/Healthcare Applications
  • Seals
  • Sporting Goods
  • Toys
  • Tubing
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Compression Set
     ASTM D395
73°F, 24.0 hr
%
  
158°F, 24.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, Injection Molded)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elastron® D 176.001 NATUREL 58 SHORE A, Elastron D 176001 NATUREL 58 SHORE A, Elastron® D , Elastron D, ElastronD176001NATUREL58SHOREA, ElastronD, D 176 001 NATUREL 58 SHORE A, D176.001 NATUREL 58 SHORE A, D176001 NATUREL 58 SHORE A, D176, 176 001 NATUREL 58 SHORE A, D176001NATUREL58SHOREA, 176.001 NATUREL 58 SHORE A, 176001 NATUREL 58 SHORE A, 176001, 001NATUREL, NATUREL58, 58SHORE, SHOREA, 176001NATUREL58SHOREA, Styrene Butadiene Styrene Block Copolymer, SBS, Thermoplastic Elastomer, TPE, Elastron, StyreneButadieneStyreneBlockCopolymer, ThermoplasticElastomer, 001176, 176D
Features
Features may also be described by the following terms: Low Temperature Flexibility, Good Abrasion Resistance, Abrasion Resistant, Good Tear Strength, Good Chemical Resistance, Chemical Resistant, Good Colorability.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Medical Applications, Tubing, Tube.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Shrinkage: 1 to 3%
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.