Anjacom 150-GF10 Almaak International Polycarbonate (Glass Fiber Reinforcement, 10%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 10% Filler by Weight
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)		in³/10min	ISO 1133
Water Absorption			ISO 62
73°F, 24 hr		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Break)		psi	ISO 527-2/5
Tensile Strain (Break)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Glass Transition Temperature (DSC)		°F	DSC
Vicat Softening Temperature		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index		V	IEC 60112
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Glow Wire Flammability Index		°F	IEC 60695-2-12
Additional Information	Nominal Value	Unit	Test Method
Relative Viscosity			ISO 1628
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjacom® 150-GF10, Anjacom 150GF10, Anjacom® , Anjacom, Anjacom150GF10, 150, 150 GF 10, 150-GF10, 150GF10, 150:GF10, 150/GF10, 150+GF10, 150_GF10, 150 GF10, 150GF, GF10, Polycarbonate, PC, Almaak International, GF150

Notes

¹Typical properties: these are not to be construed as specifications.

Anjacom® 150-GF10