Anjalon J150-GF10 Almaak International Polycarbonate (Glass Fiber Reinforcement, 10%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 10% Filler by Weight
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)		in³/10min	ISO 1133
Water Absorption			ISO 62
73°F, 24 hr		%
Equilibrium, 73°F, 50% RH		%
Viscosity Number		cm³/g	ISO 307
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Glass Transition Temperature (DSC)		°F	DSC
Vicat Softening Temperature		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index		V	IEC 60112
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjalon® J150-GF10, Anjalon J150GF10, Anjalon® , Anjalon, AnjalonJ150GF10, J 150, J 150 GF 10, J150-GF10, J150GF10, J150:GF10, J150/GF10, J150+GF10, J150_GF10, J150 GF10, J150, 150GF, GF10, Polycarbonate, PC, Almaak International, 150J

Notes

¹Typical properties: these are not to be construed as specifications.

Anjalon® J150-GF10