IDES Prospector Already have an account? Login Here

IDES

Anjamid® 6.6 350-E/GF15

Polyamide 66

Glass Fiber Reinforcement, 15%

Supplied by Almaak International GmbH

The technical datasheet with complete property values for Anjamid® 6.6 350-E/GF15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/5
Tensile Strain (Break, 73°F)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjamid® 6.6 350-E/GF15, Anjamid 66 350EGF15, Anjamid® 6.6 , Anjamid 66, Anjamid66350EGF15, Anjamid66, 6 6350 E GF 15, 6 6350, 350, 6.6350-E/GF15, 66350EGF15, 6.6350-E:GF15, 6.6350-E+GF15, 6.6350-E-GF15, 6.6350-E_GF15, 6.6350-E GF15, 6.6350:E/GF15, 6.6350/E/GF15, 6.6350+E/GF15, 6.6350_E/GF15, 6.6350 E/GF15, 66350, 6350E, 6.6350, 350 E GF 15, 66350E_GF15, 66350E GF15, 66350_EGF15, 66350 EGF15, 350-E/GF15, 350EGF15, 350-E:GF15, 350-E+GF15, 350-E-GF15, 350-E_GF15, 350-E GF15, 350:E/GF15, 350/E/GF15, 350+E/GF15, 350_E/GF15, 350 E/GF15, 350E, EGF, GF15, 350E_GF15, 350E GF15, 350_EGF15, 350 EGF15, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Almaak International, Polyamide66, Nylon66, E350, 63506
Generic Name
Generic Name may also be described by the following terms: PA66.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.