Anjadur J400 Almaak International Polybutylene Terephthalate

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)		in³/10min	ISO 1133
Water Absorption			ISO 62
73°F, 24 hr		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Yield, 73°F)		psi	ISO 527-2/50
Tensile Strain (Yield, 73°F)		%	ISO 527-2/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Melting Temperature (DSC)		°F	ISO 3146
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index		V	IEC 60112
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjadur® J400, Anjadur J400, Anjadur® , Anjadur, AnjadurJ400, J 400, J400, Polybutylene Terephthalate, PBT, Polyester, Almaak International, PolybutyleneTerephthalate, 400J
Features
Features may also be described by the following terms: Medium Viscosity.

Notes

¹Typical properties: these are not to be construed as specifications.

Anjadur® J400