IDES Prospector Already have an account? Login Here

IDES

Anjalin® 550-GF10

Acrylonitrile Butadiene Styrene

Glass Fiber Reinforcement, 10%

Supplied by Almaak International GmbH

The technical datasheet with complete property values for Anjalin® 550-GF10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Water Absorption (Equilibrium, 73°F, 50% RH)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
ISO 527-2/5
Tensile Strain (Break, 73°F)
%
ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjalin® 550-GF10, Anjalin 550GF10, Anjalin® , Anjalin, Anjalin550GF10, 550, 550 GF 10, 550-GF10, 550GF10, 550:GF10, 550/GF10, 550+GF10, 550_GF10, 550 GF10, 550GF, GF10, Acrylonitrile Butadiene Styrene, ABS, Almaak International, AcrylonitrileButadieneStyrene, GF550
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.