IDES Prospector Already have an account? Login Here

IDES

Anjablend® A J050/85S-FR

Acrylonitrile Butadiene Styrene + PC

Supplied by Almaak International GmbH

The technical datasheet with complete property values for Anjablend® A J050/85S-FR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Flame Retardant
  • Good Flow
  • High Heat Resistance
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjablend® A J050/85S-FR, Anjablend A J05085SFR, Anjablend® A , Anjablend A, AnjablendAJ05085SFR, AnjablendA, J 050, AJ 050 85 S FR, AJ 050, AJ050/85S-FR, AJ05085SFR, AJ050:85S-FR, AJ050+85S-FR, AJ050-85S-FR, AJ050_85S-FR, AJ050 85S-FR, AJ050/85S:FR, AJ050/85S/FR, AJ050/85S+FR, AJ050/85S_FR, AJ050/85S FR, AJ050, J 050 85 S FR, AJ050_85SFR, AJ050 85SFR, AJ05085S_FR, AJ05085S FR, J050/85S-FR, J05085SFR, J050:85S-FR, J050+85S-FR, J050-85S-FR, J050_85S-FR, J050 85S-FR, J050/85S:FR, J050/85S/FR, J050/85S+FR, J050/85S_FR, J050/85S FR, J050, 05085, 85S, SFR, J050_85SFR, J050 85SFR, J05085S_FR, J05085S FR, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Almaak International, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 050J, 050AJ
Features
Features may also be described by the following terms: Good Flow, High Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.