IDES Prospector Already have an account? Login Here

IDES

Anjablend® B J010/50-E

Polycarbonate + PBT

Supplied by Almaak International GmbH

The technical datasheet with complete property values for Anjablend® B J010/50-E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier
Features 
  • Good Chemical Resistance
  • High Impact Resistance
  • Impact Modified
  • Low Temperature Impact Resistance
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)
in³/10min
 ISO 1133
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjablend® B J010/50-E, Anjablend B J01050E, Anjablend® B , Anjablend B, AnjablendBJ01050E, AnjablendB, J 010, BJ 010 50 E, BJ 010, BJ010/50-E, BJ01050E, BJ010:50-E, BJ010+50-E, BJ010-50-E, BJ010_50-E, BJ010 50-E, BJ010/50:E, BJ010/50/E, BJ010/50+E, BJ010/50_E, BJ010/50 E, BJ010, J 010 50 E, BJ010_50E, BJ010 50E, BJ01050_E, BJ01050 E, J010/50-E, J01050E, J010:50-E, J010+50-E, J010-50-E, J010_50-E, J010 50-E, J010/50:E, J010/50/E, J010/50+E, J010/50_E, J010/50 E, J010, 01050, 50E, J010_50E, J010 50E, J01050_E, J01050 E, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, Almaak International, PolycarbonatePBT, Polycarbonate_PBT, 010J, 010BJ
Features
Features may also be described by the following terms: High Impact Resistance, Good Chemical Resistance, Chemical Resistant, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.