Anjadur J455-FR/GF30 Almaak International Polybutylene Terephthalate (Glass Fiber Reinforcement, 30%)

General

Material Status

Availability

Filler / Reinforcement

Features

Appearance

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)		in³/10min	ISO 1133
Water Absorption			ISO 62
73°F, 24 hr		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Melting Temperature (DSC)		°F	ISO 3146
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0591 in)			UL 94
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Anjadur® J455-FR/GF30, Anjadur J455FRGF30, Anjadur® , Anjadur, AnjadurJ455FRGF30, J 455, J 455 FR GF 30, J455-FR/GF30, J455FRGF30, J455-FR:GF30, J455-FR+GF30, J455-FR-GF30, J455-FR_GF30, J455-FR GF30, J455:FR/GF30, J455/FR/GF30, J455+FR/GF30, J455_FR/GF30, J455 FR/GF30, J455, 455FR, FRGF, GF30, J455FR_GF30, J455FR GF30, J455_FRGF30, J455 FRGF30, Polybutylene Terephthalate, PBT, Polyester, Almaak International, PolybutyleneTerephthalate, 455J
Features
Features may also be described by the following terms: Good Surface Finish.

Notes

¹Typical properties: these are not to be construed as specifications.

Anjadur® J455-FR/GF30