IDES Prospector Already have an account? Login Here

IDES

Borealis PP BD310MO

Polypropylene Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borealis PP BD310MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BD310MO is a heterophasic copolymer. This grade is characterized by an optimum combination of good impact strength and very high stiffness.

This grade is mildly nucleated to maximize the mechanical stiffness. This grade contains antistatic and demoulding additives which, together with enhanced nucleation, create a high potential for cycle time reduction.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • Antistatic
  • Mold Release
  • Nucleating Agent
Features 
  • Antistatic
  • Copolymer
  • Fast Molding Cycle
  • Good Impact Resistance
  • Good Mold Release
  • High Stiffness
  • Nucleated
Uses 
  • Crates
  • Engineering Parts
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Multi-Axial Instrumented Impact Energy
     ISO 6603-2
-4°F
ft·lb
  
32°F
ft·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BD310MO, Borealis PP , BorealisPPBD310MO, BorealisPP, PPBD 310 MO, PPBD310MO, PPBD310, PP, BD 310 MO, BD310MO, BD310, 310MO, Polypropylene Copolymer, PP Copolymer, Polypropylene, Borealis, PolypropyleneCopolymer, PPCopolymer, 310BD, 310PPBD
Features
Features may also be described by the following terms: Good Impact Resistance, High Stiffness, Good Mold Release, Easy Release, Good Demolding, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.