IDES Prospector Already have an account? Login Here

IDES

Borealis PP BF335SA

Polypropylene Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borealis PP BF335SA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BF335SA is a polypropylene copolymer intended for injection moulding.

This material has a very high impact strength while maintaining good stiffness, gives a good surface quality and is easy to process.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • Antistatic
Features 
  • Antistatic
  • Copolymer
  • Fast Molding Cycle
  • Good Surface Finish
  • High Impact Resistance
  • High Stiffness
Uses 
  • Appliances
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     Internal Method
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
UL File Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BF335SA, Borealis PP , BorealisPPBF335SA, BorealisPP, PPBF 335 SA, PPBF335SA, PPBF335, PP, BF 335 SA, BF335SA, BF335, 335SA, Polypropylene Copolymer, PP Copolymer, Polypropylene, Borealis, PolypropyleneCopolymer, PPCopolymer, 335BF, 335PPBF
Features
Features may also be described by the following terms: High Impact Resistance, High Stiffness, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Surface Finish.
Injection
Nominal Value
Unit
 
Hopper Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Holding Pressure
psi
  
Injection Notes
Back pressure: Low to medium
Screw speed: Low to medium
Flow front speed: 100 - 200 mm/s
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.