IDES Prospector Already have an account? Login Here

IDES

Borealis XL4201R

Low Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borealis XL4201R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
XL4201R is a natural crosslinkable low-density polyethylene compound especially developed for the insulation of triple extruded XLPE power cables. It provides an excellent balance of a non-staining antioxidant and peroxide, which ensures thermal stability and ease of processing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • South America
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Crosslinkable
  • Good Processability
  • Good Thermal Stability
  • Low Density
Uses 
  • Cable Jacketing
  • Insulation
 
Agency Ratings 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2/250
Tensile Strain (Break)
%
ISO 527-2/250
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
IEC 60093
Dielectric Constant (50 Hz)
 
IEC 60250
Dissipation Factor (50 Hz)
 
IEC 60250
Electric Strength
V/mil
IEC 60243-1
Additional Information
Moisture, Karl Fischer Titration: <200 ppm
Change of Tensile Properties after ageing, IEC 60811-1-2, 135°C, 168h, Crosslinked: 20 %
Hot Set Test, Elongation under Load, IEC 60811-2-1, 200°C, 0.20 MPa: 75 %
Hot Set Test, Permanent Deformation, IEC 60811-2-1, 200°C, 0.20 MPa: 5 %
Gottfert Elastograph Value, ISO 6502: 0.59 to 0.74 Nm
Monsanto ODR, ASTM D2084: 30 to 38 dNm
Methanol Wash, BTM00118: <1200 ppm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis XL4201R, Borealis , BorealisXL4201R, XL 4201 R, XL4201R, XL4201, 4201R, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PolyethyleneLowDensity, 4201XL
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Good Thermal Stability, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): HD (1), AEIC (1), IEC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.