RAMSTER PE300J6 Polyram Polyethylene Terephthalate (Glass Bead\Glass Fiber, 30%)

Product Description

30% GLASS-FIBER AND GLASS-BEADS REINFORCED, HIGH STIFFNESS PET FOR INJECTION MOULDING APPLICATIONS.

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (280°C/2.16 kg)		g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 2577
Water Absorption
Saturation		%	ASTM D570
Saturation, 73°F		%	ISO 62
Equilibrium, 73°F, 50% RH		%	ASTM D570, ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact
73°F		ft·lb/in	ASTM D256
73°F		ft·lb/in²	ISO 180
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		°F	ASTM D648, ISO 75-2/B
264 psi, Unannealed		°F	ASTM D648, ISO 75-2/A
Melting Temperature		°F	ISO 11357-3, ASTM D3418
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Dielectric Constant (1 MHz)			IEC 60250
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.118 in)			UL 94
Glow Wire Flammability Index		°F	IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RAMSTER PE300J6, RAMSTER , RAMSTERPE300J6, PE 300 J 6, PE300J6, PE300, 300J, J6, Polyethylene Terephthalate, PET, Polyester, Polyram, PolyethyleneTerephthalate, 300PE
Features
Features may also be described by the following terms: High Stiffness.

Notes

¹Typical properties: these are not to be construed as specifications.

RAMSTER PE300J6