IDES Prospector Already have an account? Login Here

IDES

RAMOFIN PPC361T4

Polypropylene Copolymer

Mineral Filler, 20%

Supplied by Polyram Ram-On Industries

The technical datasheet with complete property values for RAMOFIN PPC361T4 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
20% MINERAL FILLED, HEAT RESISTANT POLYPROPYLENE FOR INJECTION MOULDINDG APPLICATIONS.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Mineral Filler, 20% Filler by Weight
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Molding Shrinkage
     
Flow
in/in
ASTM D955
--
%
ISO 2577
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638, ISO 527-2
Tensile Strength (Yield)
psi
ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
ASTM D638, ISO 527-2
Flexural Modulus
psi
ASTM D790, ISO 178
Flexural Strength
psi
ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     
73°F
ft·lb/in
ASTM D256
73°F
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648, ISO 75-2/B
264 psi, Unannealed
°F
ASTM D648, ISO 75-2/A
Maximum Use Temperature - Short Peaks Operation
°F
 
Melting Temperature
°F
ISO 11357-3, ASTM D3418
Thermal Conductivity
Btu·in/hr/ft²/°F
ASTM C177, DIN 52612
Maximum Continuous Use Temperature
°F
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.118 in)
 
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RAMOFIN PPC361T4, RAMOFIN , RAMOFINPPC361T4, PPC 361 T 4, PPC361T4, PPC361, 361T, T4, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Polyram, PolypropyleneCopolymer, PPCopolymer, 361PPC
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Holding Pressure
psi
 
Back Pressure
psi
 
Screw Speed
rpm
 
Injection Notes
Fill Speed: 25 to 50 mm/sec
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.