HIFOR Clear Polyethylene SC74560-F Westlake Chem Polyethylene, Linear Low Density

Product Description

Hifor Clear Polyethylene SC74560-F polymer is a high strength and high clarity polyethylene designed for blown film extrusion that contains medium slip and medium antiblock additives. Films produced with this resin exhibit good toughness, with excellent gloss and clarity for a product of this density. SC74560-F is well suited for packaging frozen goods, fruits and vegetables, and baked goods.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Additive

Medium Antiblock

Medium Slip

Features

Good Toughness

High Clarity

High Gloss

High Strength

Medium Antiblocking

Medium Slip

Uses

Bags

Cosmetics

Film

Food Packaging

Household Goods

Medical/Healthcare Applications

Appearance

Clear/Transparent

Forms

Pellets

Processing Method

Blown Film

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Secant Modulus			ASTM D882
1% Secant, MD: 1.0 mil, Blown Film		psi
1% Secant, TD: 1.0 mil, Blown Film		psi
Tensile Strength			ASTM D882
MD: Yield, 1.0 mil, Blown Film		psi
TD: Yield, 1.0 mil, Blown Film		psi
MD: Break, 1.0 mil, Blown Film		psi
TD: Break, 1.0 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 1.0 mil, Blown Film		%
TD: Break, 1.0 mil, Blown Film		%
Dart Drop Impact (1.0 mil, Blown Film)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 1.0 mil, Blown Film		g
TD: 1.0 mil, Blown Film		g
Seal Initiation Temperature (1.0 mil, Blown Film)		°F
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 1.00 mil, Blown Film)			ASTM D2457
Haze (1.00 mil, Blown Film)		%	ASTM D1003
Additional Information
Extrusion conditions used to produce 1 mil (0.025 mm) film include a 6 in die, 2.5 in 24:1 L:D barrier screw, 2.4:1 BUR, 100-mil die gap, 15 in frostline height, 430° F melt temperature, and 7.5 lb/hr/inch die output. Density results are on Base Resin.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIFOR Clear Polyethylene SC74560-F, HIFOR Clear Polyethylene SC74560F, HIFOR Clear Polyethylene , HIFORClearPolyethyleneSC74560F, HIFORClearPolyethylene, SC 74560, PolyethyleneSC 74560 F, PolyethyleneSC 74560, PolyethyleneSC74560-F, PolyethyleneSC74560F, PolyethyleneSC74560:F, PolyethyleneSC74560/F, PolyethyleneSC74560+F, PolyethyleneSC74560_F, PolyethyleneSC74560 F, PolyethyleneSC74560, SC 74560 F, SC74560-F, SC74560F, SC74560:F, SC74560/F, SC74560+F, SC74560_F, SC74560 F, SC74560, 74560F, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Westlake Chem, PolyethyleneLinearLowDensity, 74560SC, 74560PolyethyleneSC
Features
Features may also be described by the following terms: High Gloss, Medium Slip, High Strength, High Clarity, Good Toughness, Tough, Medium Antiblocking, Medium Antiblock.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Food Packaging, Medical Applications.

Notes

¹Typical properties: these are not to be construed as specifications.

HIFOR Clear Polyethylene SC74560-F

Linear Low Density Polyethylene

Supplied by Westlake Chemical Corporation