IDES Prospector Already have an account? Login Here

IDES

HIFOR Polyethylene LT74155

Linear Low Density Polyethylene

Supplied by Westlake Chemical Corporation

The technical datasheet with complete property values for HIFOR Polyethylene LT74155 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Westlake linear low density polyethylene film resins meet the needs of demanding medical, food and industrial packaging applications such as caps and closures. From the best-in-class and gloss to high impact and tear strength, there is a Westlake LLDPE grade that offers the high performance properties you are seeking.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Medium Antiblock
Features 
  • Good Impact Resistance
  • Good Tear Strength
  • High Gloss
  • Medium Antiblocking
  • Medium Clarity
Uses 
  • Caps
  • Closures
  • Film
  • Food Packaging
  • Industrial Applications
  • Medical/Healthcare Applications
  • Packaging
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIFOR Polyethylene LT74155, HIFOR Polyethylene , HIFORPolyethyleneLT74155, HIFORPolyethylene, PolyethyleneLT 74155, PolyethyleneLT74155, Polyethylene, LT 74155, LT74155, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, PE, Westlake Chem, PolyethyleneLinearLowDensity, 74155LT, 74155PolyethyleneLT
Features
Features may also be described by the following terms: Good Impact Resistance, Medium Antiblocking, Medium Antiblock, Good Tear Strength, High Gloss, Medium Clarity.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Medical Applications, Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.