RTP Compounds ESD C 901 RTP Polysulfone (Glass Fiber Reinforcement, 10%)

General

Material Status

Availability

Filler / Reinforcement

Features

RoHS Compliance

Processing Method

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow (0.125 in)		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ASTM D638
Tensile Strength		psi	ASTM D638
Tensile Elongation (Yield)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.125 in)		ft·lb/in	ASTM D256
Unnotched Izod Impact (0.125 in)		ft·lb/in	ASTM D4812
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity
--²		ohm	ASTM D257
--		ohm	ESD STM11.11
Volume Resistivity		ohm·cm	ASTM D257
Static Decay³			FTMS 101C 4046.1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RTP Compounds ESD C 901, RTP Compounds , RTPCompoundsESDC901, RTPCompounds, CompoundsESD C 901, CompoundsESDC, Compounds, CompoundsESDC901, ESD C 901, ESDC, C901, ESDC901, Polysulfone, PSU, RTP, CESD, CCompoundsESD
Features
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive, Electrostatic Discharge Protection, ESD Protection.

Injection	Nominal Value	Unit
Drying Temperature - Desiccant Dryer		°F
Drying Time - Desiccant Dryer		hr
Dew Point - Desiccant Dryer		°F
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi

Notes

¹Typical properties: these are not to be construed as specifications.

²ESD STM11.11

³MIL-PRF-81705D, 5kV to 50 V, 12% Rh

RTP Compounds ESD C 901