G-Lene F56A003 Gas Authority Polyethylene, High Density

General

Material Status

Availability

Additive

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ASTM D1894
vs. Itself - Dynamic, Blown Film
vs. Itself - Static, Blown Film
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Break, 2.0 mil, Blown Film		psi
TD: Break, 2.0 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 2.0 mil, Blown Film		%
TD: Break, 2.0 mil, Blown Film		%
Dart Drop Impact (2.0 mil, Blown Film)		g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD: 2.0 mil, Blown Film		g
TD: 2.0 mil, Blown Film		g
Additional Information
Data gathered from 50 µ blown film with a BUR of 2.1:1.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: G-Lene F56A003, GLene F56A003, G-Lene , GLene, G:Lene, G/Lene, G+Lene, G_Lene, G Lene, GLeneF56A003, F 56 A 003, F56A003, F56, 56A, A003, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Gas Authority, PolyethyleneHighDensity, 56F
Features
Features may also be described by the following terms: Low Warpage, Low Warp, High Stiffness, High Impact Resistance, High Gloss.

Notes

¹Typical properties: these are not to be construed as specifications.

G-Lene F56A003