G-Lene F20S020 Gas Authority Polyethylene, Linear Low Density

General

Material Status

Availability

Additive

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ASTM D1894
vs. Itself - Dynamic, Blown Film
vs. Itself - Static, Blown Film
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Break, 1.6 mil, Blown Film		psi
TD: Break, 1.6 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 1.6 mil, Blown Film		%
TD: Break, 1.6 mil, Blown Film		%
Dart Drop Impact (1.6 mil, Blown Film)		g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD: 1.6 mil, Blown Film		g
TD: 1.6 mil, Blown Film		g
Additional Information
Data gathered from 40 µ blown film with a BUR of 2.1:1.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: G-Lene F20S020, GLene F20S020, G-Lene , GLene, G:Lene, G/Lene, G+Lene, G_Lene, G Lene, GLeneF20S020, F 20 S 020, F20S020, F20, 20S, S020, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Gas Authority, PolyethyleneLinearLowDensity, 20F
Features
Features may also be described by the following terms: Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, Low Warpage, Low Warp, Low Gel, High Stiffness, High Impact Resistance, High Gloss, Slip, Unspecified Slip.

Notes

¹Typical properties: these are not to be construed as specifications.

G-Lene F20S020