IDES Prospector Already have an account? Login Here

IDES

INEOS LLDPE LL6130AA

Linear Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LLDPE LL6130AA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL6130AA is particularly suitable for high performance cast stretch film applications, in particular as a core layer in co-extruded structures.

LL6130AA is a linear low density polyethylene copolymer containing hexene (C6) as the comonomer.
It offers the following properties:
  • High output rates
  • Excellent overall film appearance and surface finish
  • Very good puncture resistance

We recommend that you consult your INEOS O&P Europe technical representative for further advice on the use of LL6130AA.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Surface Finish
  • Hexene Comonomer
  • Puncture Resistant
  
Uses 
  • Cast Film
  • Film
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Coextrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3/150
1% Secant, MD: 0.79 mil
psi
  
1% Secant, TD: 0.79 mil
psi
  
Tensile Strength
     ISO 527-3/150
MD: 0.79 mil
psi
  
TD: 0.79 mil
psi
  
Tensile Elongation
     ISO 527-3/150
MD: Break, 0.79 mil
%
  
TD: Break, 0.79 mil
%
  
Dart Drop Impact (0.79 mil)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 0.8 mil
lbf/in
  
TD: 0.8 mil
lbf/in
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.787 mil)
 
 ASTM D2457
Haze (0.787 mil)
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Puncture Resistance
in·lb/mil
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LLDPE LL6130AA, INEOS LLDPE , INEOSLLDPELL6130AA, INEOSLLDPE, LLDPELL 6130 AA, LLDPELL6130AA, LLDPELL6130, LLDPE, LL 6130 AA, LL6130AA, LL6130, 6130AA, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLinearLowDensity, 6130LL, 6130LLDPELL
Features
Features may also be described by the following terms: Good Surface Finish, Hexene Comonomer, Good Puncture Resistance, Puncture Resistant.
Uses
Uses may also be described by the following terms: Cast Film.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.