INEOS LLDPE LL0230AA Ineos Polyolefins Polyethylene, Linear Low Density

Product Description

LL0230 AA has been specially developed for the production of cast stretch film and is particularly suitable for use on modern high speed coextrusion lines.

LL0230 AA is a linear low density polyethylene copolymer containing butene-1 (C4) as the comonomer.

LL0230AA offers the following advantages when it is processed by the cast extrusion process:

Good balance of mechanical properties

Good optical properties

Good cling performance

We recommend that you consult your INEOS technical representative for further advice on the use of LL0230AA.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

Features

Antioxidant

Butene Comonomer

Opticals

Uses

Cast Film

Film

Stretch Wrap

RoHS Compliance

Forms

Pellets

Processing Method

Blown Film

Cast Film

Coextrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Modulus			ISO 527-3/150
1% Secant, MD: 0.79 mil		psi
1% Secant, TD: 0.79 mil		psi
Tensile Stress			ISO 527-3/150
MD: Yield, 0.79 mil		psi
TD: Yield, 0.79 mil		psi
MD: 0.79 mil		psi
TD: 0.79 mil		psi
Tensile Elongation			ISO 527-3/150
MD: Break, 0.79 mil		%
TD: Break, 0.79 mil		%
Dart Drop Impact (0.79 mil)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 0.8 mil		lbf/in
TD: 0.8 mil		lbf/in
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A50
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 0.787 mil)			ASTM D2457
Haze (0.787 mil)		%	ASTM D1003
Additional Information	Nominal Value	Unit	Test Method
Puncture Resistance (0.8 mil)		in·lb/mil	Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LLDPE LL0230AA, INEOS LLDPE , INEOSLLDPELL0230AA, INEOSLLDPE, LLDPELL 0230 AA, LLDPELL0230AA, LLDPELL0230, LLDPE, LL 0230 AA, LL0230AA, LL0230, 0230AA, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLinearLowDensity, 0230LL, 0230LLDPELL
Features
Features may also be described by the following terms: Butene Comonomer.
Uses
Uses may also be described by the following terms: Cast Film, Stretch Wrap.

Extrusion	Nominal Value	Unit
Melt Temperature		°F
Extrusion Notes
Blown Film Melt Temperature: 165 to 215°C

Notes

¹Typical properties: these are not to be construed as specifications.

INEOS LLDPE LL0230AA

Linear Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe