INEOS LDPE 21H460 Ineos Polyolefins Polyethylene, Low Density

Product Description

21H460 is suitable for a variety of general-purpose packaging films, liners, carrier bags, fine shrink film.
21H460 is an autoclave LDPE homopolymer. It offers the following properties:

Good strength and dart drop resistance

High clarity

Good drawdown

Low tendency to block

If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

Features

Antioxidant

Good Drawdown

Good Strength

High Clarity

Uses

Bags

Film

Laminates

Liners

Packaging

Shrink Wrap

RoHS Compliance

Forms

Pellets

Processing Method

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (Blown Film)			ASTM D1894
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Modulus			ISO 1184
1% Secant, MD: 2.0 mil, Blown Film		psi
1% Secant, TD: 2.0 mil, Blown Film		psi
Tensile Stress			ISO 1184
MD: Yield, 2.0 mil, Blown Film		psi
TD: Yield, 2.0 mil, Blown Film		psi
MD: 2.0 mil, Blown Film		psi
TD: 2.0 mil, Blown Film		psi
Tensile Elongation			ISO 1184
MD: Break, 2.0 mil, Blown Film		%
TD: Break, 2.0 mil, Blown Film		%
Dart Drop Impact (2.0 mil, Blown Film)		g	ASTM D1709A
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A50
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 1.97 mil, Blown Film)			ASTM D2457
Haze (1.97 mil, Blown Film)		%	ASTM D1003
Additional Information
Film properties taken from 50 µm film, 2.5:1 blow up ratio, 180°C melt temperature.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 21H460, INEOS LDPE , INEOSLDPE21H460, INEOSLDPE, LDPE 21 H 460, LDPE21H460, LDPE21, LDPE, 21 H 460, 21H460, 21H, H460, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, H21, 21LDPE
Features
Features may also be described by the following terms: High Clarity, Good Strength, Good Drawdown, Good draw down.
Uses
Uses may also be described by the following terms: Shrink Wrap.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

INEOS LDPE 21H460

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe