IDES Prospector Already have an account? Login Here

IDES

Alastian AT PE HD01-3

High Density Polyethylene

Supplied by Alastian

The technical datasheet with complete property values for Alastian AT PE HD01-3 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AT PE HD01-3 is a high density polyethylene with an excellent combination of stiffness and ESCR and a good impact resistance. It is delivered in pellet form and containing antioxidants. The grade is designed for jerry cans.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Impact Resistance
  • Good Stiffness
  • High Density
  • High ESCR (Stress Crack Resist.)
  • High Rigidity
Uses 
  • Jerricans
Forms 
  • Pellets
Processing Method 
  • Extrusion Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (-22°F)
ft·lb/in²
 ISO 179/1A
Tensile Impact Strength
ft·lb/in²
 ISO 8256
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 132/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alastian AT PE HD01-3, Alastian AT PE HD013, Alastian AT PE , AlastianATPEHD013, AlastianATPE, HD 01, PEHD 01 3, PEHD 01, PEHD01-3, PEHD013, PEHD01:3, PEHD01/3, PEHD01+3, PEHD01_3, PEHD01 3, PEHD01, HD 01 3, HD01-3, HD013, HD01:3, HD01/3, HD01+3, HD01_3, HD01 3, HD01, 013, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Alastian, PolyethyleneHighDensity, 01HD, 01PEHD
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Good Stiffness, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, High Rigidity.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.