IDES Prospector Already have an account? Login Here

IDES

CYCOLOY* CM6140 Resin

Acrylonitrile Butadiene Styrene + PC

Unspecified Filler\Reinfor.

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for CYCOLOY* CM6140 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Cycoloy resin grade CM6140 is a flame retardant, filled PC/ABS blend. It is of non-brominated & non-chlorinated FR system to meet UL94 V0 at 0.8mm. Key features include thin wall FR, higher stiffness, balanced properties in flow, impact and heat designed for various thin wall applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Unspecified Filler\Reinfor.
Additive 
  • Flame Retardant
Features 
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Good Flow
  • Good Impact Resistance
  • Good Stiffness
  • Medium Heat Resistance
Uses 
  • Thin-walled Parts
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (220°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     Internal Method
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Water Absorption
      
24 hr
%
 ASTM D570
24 hr, 50% RH
%
 ASTM D570
Saturation, 73°F
%
 ISO 62
Equilibrium, 73°F, 50% RH
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield 4
psi
 ASTM D638
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 5
psi
 ASTM D790
-- 6
psi
 ISO 178
Flexural Strength
      
-- 6, 7
psi
 ISO 178
Yield, 1.97 in Span 5
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 8
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 11
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Ball Pressure Test (167°F)
 
 IEC 60695-10-2
CLTE
     ASTM E831, ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0236 in
 
  
0.0315 in
 
  
0.0591 in
 
  
Glow Wire Flammability Index (0.0315 in)
°F
 IEC 60695-2-12
Glow Wire Ignition Temperature
     IEC 60695-2-13
0.0394 in
°F
  
0.118 in
°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics, Cycloy

Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* CM6140 Resin, CYCOLOY CM6140 Resin, CYCOLOY* , CYCOLOY, CYCOLOYCM6140Resin, CM 6140 Resin, CM6140 Resin, CM6140, 6140Resin, CM6140Resin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 6140CM
Features
Features may also be described by the following terms: No Chlorine Content, Chlorine Free, Bromine Free, No Bromine Content, Good Stiffness, Good Impact Resistance, Good Flow, Medium Heat Resistance.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
4Type I, 2.0 in/min
50.051 in/min
60.079 in/min
7Yield
880*10*3 sp=62mm
980*10*3
1080*10*4 mm
11Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.