IDES Prospector Already have an account? Login Here

IDES

GELOY* HRA222 Resin

Acrylonitrile Styrene Acrylate

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for GELOY* HRA222 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GELOY HRA222 is a multi-purpose, chlorine and bromine free flame retardant ASA+PC alloy for injection moulding processes. Typical properties as measured on natural material.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Flame Retardant
Features 
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow 2
in/in
 Internal Method
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 4
psi
 ASTM D638
Yield 5
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Yield
psi
 ISO 527-2/50
Break 4
psi
 ASTM D638
Break 5
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 4
%
 ASTM D638
Yield 5
%
 ASTM D638
Yield
%
 ISO 527-2/5
Yield
%
 ISO 527-2/50
Break 4
%
 ASTM D638
Break 5
%
 ASTM D638
Break
%
 ISO 527-2/5, ISO 527-2/50
Flexural Modulus 6
psi
 ISO 178
Flexural Strength 6, 7
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 8 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
      
32°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 9
ft·lb/in²
 ISO 180/1A
32°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 10
      
66 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span
°F
 ISO 75-2/Ae
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Ball Pressure Test (167°F)
 
 IEC 60695-10-2
CLTE
     ISO 11359-2
Flow: -22 to 176°F
in/in/°F
  
Transverse: -22 to 176°F
in/in/°F
  
Transverse: 73 to 176°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0787 in
 
  
0.0906 in
 
  
0.0906 in, Testing by SABIC
 
  
Glow Wire Flammability Index (0.0394 in)
°F
 IEC 60695-2-12
Oxygen Index
%
 ISO 4589-2
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* HRA222 Resin, GELOY HRA222 Resin, GELOY* , GELOY, GELOYHRA222Resin, HRA 222 Resin, HRA222 Resin, HRA222, 222Resin, HRA222Resin, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylate, 222HRA
Features
Features may also be described by the following terms: No Chlorine Content, Chlorine Free, Bromine Free, No Bromine Content.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.20 in/min
4Type I, 0.20 in/min
5Type I, 2.0 in/min
60.079 in/min
7Yield
880*10*4 sp=62mm
980*10*4
10120*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.